New blended solar cells yield high power conversion efficiencies

Researchers at Hiroshima University in Japan have blended together various polymer and molecular semiconductors as photo-absorbers to create a solar cell with increased power efficiencies and electricity generation.

Schematic illustration of the distribution of the materials in the semiconductor layer for the OPV cell.
ITIC is selectively located at the interface of PTzBT and PCBM domains, which leads to an efficient charge carrier (photocurrent) generation.

Researchers at Hiroshima University in Japan have blended together various polymer and molecular semiconductors as photo-absorbers to create a solar cell with increased power efficiencies and electricity generation. These types of solar cells, known as organic photovoltaics (OPV), are devices that generate electricity when light is incident upon their photo-absorbers. The efficiency of a solar cell is determined by comparing how much electricity is generated to how much light is incident upon the cell. This is referred to as “photon harvest”, or how many particles of light are converted into electrical current. The more efficient the solar cell, the more cost effective and pragmatic the cell is for commercial use.

The team at the Graduate School of Advanced Science and Engineering added only a small amount of a compound that absorbs long wavelengths of light resulting in an OPV that was 1.5 times more efficient than the version without the compound. The compound was able to enhance the absorption intensity due to the optical interference effect within the device. The group went on to show that how they are distributed is key to further improved power generation efficiency.

“The addition of a very small amount of a sensitizer material to an OPV cell, which consists of a semiconducting polymer that we developed previously and along with other materials,” said Itaru Osaka, corresponding author of the paper, published November 2020 in Macromolecules.

“This leads to a significant increase in the photocurrent and thereby the power conversion efficiency due to the amplified photon absorption that originates in the optical interference effect. A key is to use a very specific polymer, one that allows us to have a very thick semiconductor layer for OPV cells, which significantly enhances optical interference effect compared to a thin layer.”

As for future work, Osaka has his eyes set on pushing the boundaries of state of the art solar cells.

“Our next step is to develop better semiconducting polymers as the host material for this type of OPV and better sensitizer materials that can absorb more photons in the longer wavelength regions. This would lead to the realization of the world’s highest efficiency in OPV cells.”

###

About Hiroshima University

Since its foundation in 1949, Hiroshima University has striven to become one of the most prominent and comprehensive universities in Japan for the promotion and development of scholarship and education. Consisting of 12 schools for undergraduate level and 4 graduate schools, ranging from natural sciences to humanities and social sciences, the university has grown into one of the most distinguished comprehensive research universities in Japan. English website: https://www.hiroshima-u.ac.jp/en

Additional multimedia

Photoresponse spectra for the OPV cells with PTzBT/PCBM (binary system) and PTzBT/PCBM/ITIC (sensitized ternary system)
ITIC as a sensitizer showed the external quantum efficiency that is similar to the host polymer PTzBT despite the fact that only 6wt% of ITIC was added to the PTzBT/PCBM host materials.

Simulated absorption distribution for the sensitized ternary OPV cells with different semiconductor layer thickness.
(a) ~100 nm thickness, (b) ~400 nm thickness.
ITIC has three “absorption spots” when the semiconductor layer (PTzBT/PCBM/ITIC) is thick while it has only one when the layer is thin. This originates in the enhanced optical interference.

Published: 09 Dec 2020

Institution:

Contact details:

Country: 
Journal:
News topics: 
Academic discipline: 
Content type: 
Reference: 

Title: Significantly Sensitized Ternary Blend Polymer Solar Cells with a Very Small Content of the Narrow-Band Gap Third Component That Utilizes Optical Interference
Authors: Masahiko Saito, Yasunari Tamai, Hiroyuki Ichikawa, Hiroyuki Yoshida, Daisuke Yokoyama, Hideo Ohkita, and Itaru Osaka
DOI: 10.1021/acs.macromol.0c01787

Funding information:

This research was supported by Advanced Low Carbon Technology Research and Development Program (ALCA) of Japan Science and Technology Agency (grant no. JPMJAL 1404), “Next Generation Photovoltaics” Promising Research Initiatives in Hiroshima University [the Program for Enhancement of Research Universities from the Ministry of Education, Culture, Sports, Science, and Technology (MEXT)], Grant-in-Aid for Scientific Research from Japan Society for the Promotion of Science (no. 19K21129), and Futaba Research Grant Program.